urbanista Chicago - Earbuds Manual

Table of Contents

Contents

1 INTRODUCTION
2 CONTROLS
3 THE CONTROLLER
4 FUNCTIONS
5 CHARGER
- 5.1 CONNECT TO CHARGER
6 GOFIT
7 Documents / Resources
- 7.1 Download manual

INTRODUCTION

WELCOME TO THE URBANISTA COMMUNITY!
Thank you for purchasing a pair of Urbanista Chicago earphones. Urbanista is inspired by urban environments all around the world. Our products are developed to enhance an active, mobile lifestyle.

The Chicago is a wireless earphone that embodies the spirit of the athlete, offering intensified sound and matching endurance.

Equipped with specialized GoFit tips, you can switch between heightened sound insulation or letting more ambient sound in to keep track of your surroundings.

With a battery life of 7 hours and an IPX5 water resistance rating, the Chicago rises to any occasion.

CONTROLS

ON/OFF

ON - Press and hold the multifunction button for 5 seconds to turn the device on. The LED light will repeatedly flash red then blue to indicate the earphones are waiting to be paired.

OFF - When powered on, press and hold the multifunction button for 5 seconds to turn the device off.

LED STATUS

POWER ON - LED Repeatedly flashes red then blue.

POWER OFF - LED has no light.

PAIRING - LED will repeatedly flash red then blue as the device is waiting to be paired. Once the device is paired, the LED will repeatedly flash blue once every 10 seconds.

MUSIC AND CALLS

Via the multifunction button:

ACTIVATE VOICE ASSISTANT - Tap twice.
ACCEPT CALL - Tap once.
END CALL - Tap once.
PLAY/PAUSE - Tap once.

Via the + and - volume buttons:

INCREASE VOLUME - Tap (+).
DECREASE VOLUME - Tap (-).
SKIP TO NEXT TRACK - Hold (+) for 1 second.
SKIP TO PREVIOUS TRACK - Hold (-) for 1 second.

THE CONTROLLER

FUNCTIONS

PAIRING

Press and hold the multifunction button for 5 seconds to turn the device on and to simultaneously activate pairing mode. The LED light will repeatedly flash red then blue to indicate the earphones are waiting to be paired.

From the Bluetooth settings menu of the device you want to pair the earphones to, select Urbanista Chicago. If paired successfully, the LED will repeatedly flash blue once every 10 seconds.

The effective connection range of these Bluetooth earphones is 10 meters without any obstacles in between both devices.

ADDING A NEW BLUETOOTH CONNECTION

With the earphones turned off, press and hold the multifunction button for 6-7 seconds. This will cause the earphones to beep three times followed by the LED flashing repeatedly. You can now add a new device to be paired with the earphones.

CHARGING/BATTERY LIFE

To charge the earphones, attach the included cable and connect it to a power outlet or to a power source such as a computer. The LED will turn a solid blue while charging and will turn off when fully charged.

Offering 7 hours of playtime and with a standby time of 120 hours, it will take approximately 2.5 hours to fully charge the device.

CHARGER

Front

Side

CONNECT TO CHARGER

Align the pins on the charging socket with the rear of the remote control (the LED should be facing you) and they will magnetically snap into place.
Once in place, the LED will turn a solid blue.

GOFIT

CLEANING

Every now and then you will likely need to clean the GoFit tips due to dirt buildup.

To do so, firmly grip the tip with one hand and the earphone with the other then gently peel back the top portion of the tip until it can safely be removed.

Once removed, dampen a cloth with warm water and rub the exterior and interior of the tip using a mild soap. Additionally, you can clean the tips under a running faucet.

After cleaning, be sure to rinse and dry off the tips before placing them back onto the earphones.

ATTACHING GOFIT TIPS

The Chicago comes with two uniquely designed types of GoFit earphone tips, one offering a more insulated sound experience and the other allowing more sound to filter in for better awareness of your surroundings.

To attach the tips:
Place them in between your thumb and finger and carefully fit them onto the earphones until they are properly secured in place. Both types of the GoFit tips feature a unique design that hold the tips in place to ensure a snug fit.