General
1.9
Safety information and protective measures
WARNING
Siemens AG
Medical Solutions
Risk of death, injuries or material damage.
Non-compliance can lead to death, injuries or material damage.
When performing service work and tests, adhere to the
product-specific safety information in the documents.
When performing service work and tests, adhere to the
general safety information contained in ARTD Part 2.
Connect the MOBILETT Plus HP only to a mains power
supply outlet (receptacle) that corresponds to the instal-
lation requirements of VDE 0107 or country-specific reg-
ulations.
Remove or install boards only when the generator is
switched OFF. Adhere to the ESD guidelines e .
Checks and adjustments performed with radiation ON
are identified by the radiation warning symbol x . Dur-
ing these types of adjustments, radiation protective
clothing must be worn.
Perform the protective conductor test according to
ARTD-002.731.17... upon completion of the work and
after all covers have been reattached.
SPR8-220.101.04.03.02
07.05
Page 13 of 64
CS PS 24
13
MOBILETT Plus HP