20
1.14
Technical Safety Checks (TSC)
Abbreviation: TSC = Technical Safety Checks
NOTE
Technical Safety Checks,
Test Certificate - check
1 Identification data
2 General checks
2.1 Visual inspection: Are there any dam-
ages affecting safety?
2.2 Are all cables and cable guides firmly
attached and in place, without any visible
damage?
MOBILETT Plus HP
•
Within the purview of DIN VDE 0751-1, the operator of medical
engineering products has to perform technical safety checks at
regular intervals.
•
The checks listed in these maintenance instructions contain all
technical safety checks according to DIN VDE 0751-1 – except
for the checks of the completeness, presence and legibility of
the necessary operator documents.
•
A separate protocol with the print number SP00.000.834.01... is
available for each technical safety check.
•
Within the purview of DIN VDE 0751-1, we recommend docu-
menting the results of the maintenance both in the mainte-
nance protocol and in the TSC protocol. The protocols should
be filled out completely and handed over to the client after the
maintenance is completed.
•
In the table below, each technical safety check listed in the doc-
ument SP00.000.834.01... is assigned to the corresponding
maintenance work.
SPR8-220.101.04.03.02
07.05
Maintenance instructions – check/
Comments
Please fill in the fields.
n.a.
2.1.1 Damage, checks:
SIM Covers
SIM Cassette compartment
SIM Control and display panel
SIM Exposure release cable
SIM Single tank generator
SIM Collimator
2.2.9 Mains cable, checks:
SIM Damage
SIM Cable winder
SIM Protective conductor
2.2.11 Arm cable harness, check:
SIM Damage
Page 20 of 64
CS PS 24
General
Siemens AG
Medical Solutions