1 - 2
Sections marked with this symbol have been included in the Siemens Training Video (part
of the self-study packet), which can be ordered through Siemens customer service.
This symbol indicates components sensitive to Electro-Static Discharge (ESD).
Safety information and protective measures
CAUTION
WARNUNG
WARNING
MOBILETT Plus/ Plus E
•
When performing service work and tests adhere to:
- the product-specific safety information in the documents,
- as well as the general safety information contained in ARTD
Part 2.
•
Connect the MOBILETT Plus/Plus E only to mains power supply
outlet (receptacle) , that corresponds to the installation
requirements of VDE 0107 or country-specific regulations.
•
Remove or install boards only when the generator is switched
OFF. Adhere to the ESD guidelines
•
Checks and adjustments performed with radiation ON are
identified by the radiation warning symbol
types of adjustments, radiation protective clothing must be
worn.
•
Never work with the system open if the capacitor is charging or
has just charged.
•
The capacitor bank may still be charged even if the system is
switched OFF and the mains cable is disconnected. Life-
threatening electric shock hazard exists.
To avoid danger, refer to the section entitled
"Protective measures when working on the capacitor bank".
Register 6
SPR8-215.850.02
Rev. 01
.
Page 2 of 4
01.02
SPS-UD
General
1
. During these
Siemens-Elema AB
Solna, Sweden