Analysis probe—operating characteristics
The following operating characteristics are not specifications, but are
typical operating characteristics for the HP E2480A CPU32 analysis
probe.
Operating Characteristics
Microcontroller
Motorola 68331, 68332, 68334, 68335, 68336, or 68376
Supported
132-pin PQFP, 144-pin TQFP, 160-pin PQFP
Package
Supported
Mandatory 4 for state. Up to 8 for timing.
Probes
Required
Logic Analyzers
HP 16600A, HP 16601A, HP 16602A, HP 16603A, HP 16550A (one or
two cards), HP 16554A/55A/56A (one or two cards), HP 16555D/56D/
Supported
57D (one or two cards), HP 1660A/AS/C/CS/CP, HP 1661A/AS/C/CS/
CP, HP 1662A/AS/C/CS/CP, HP 1670A/D, HP 1671A/D, HP 1672A/D
See chapter 1 for available accessories. A probe adapter and a
Accessories
transition board are required. For address reconstruction, the
Required
emulation module is required.
An emulation module can be connected to the analysis probe.
Optional
Accessories
Electrical Characteristics
650 mA typical @ 5V, supplied by the logic analyzer.
Power
Requirements
CAT I Pollution degree 2.
10 pF maximum on all signals.
Signal Line
Loading
Environmental Characteristics (Operating)
Temperature
0 to + 50 degrees C
4,600 m
Altitude
Up to 75% noncondensing. Avoid sudden, extreme temperature
Humidity
changes which could cause condensation on the circuit board.
For indoor use only.
Solutions for CPU32
Chapter 10: Hardware Reference
Analysis probe—operating characteristics
219