Table of Contents
Advertisement
Caution
Components inside the appliance can overheat if they are not cooled even for a short
period of time. If you are replacing a failed fan unit, and do not completely remove power
to the appliance, do not allow the appliance to run without a fan unit for any longer than
necessary.
To replace a fan unit
1. Locate the fan unit on the back of the IP2450 appliance and the four retaining screws that
secure it.
2. Loosen the retaining screws by turning them counterclockwise.
Check Point IP2450 Security Platform Installation Guide
700W AC
700W AC
Installing or Replacing a Fan Unit
FAULT
OVER
TEMP
PWR OK
FAULT
OVER
TEMP
PWR OK
Fan unit
00623
113
Advertisement
Table of Contents
