Table of Contents
Advertisement
Using Group
Maps (continued)
Note By default, the
KVL 3000 group maps
are configured with the
source slots matching
the target slots (i.e.,
source slot 0 is mapped
to target slot 0, source
slot 1 is mapped to target
slot 1, etc.).
ASN Operation
Chapter 4 Entering and Loading Keys
3.
Use the
key to select EDIT. The
following screen will appear.
Note that the S" in S TRAF" stands for
Source" (i.e., KVL 3000 slot), and that the
D" in D TRAF" stands for Destination"
(i.e., target slot).
GROUP MAP 0
S TRAF 0
D TRAF>0
NOCHG
4.
Use the
or
keys to select the first
desired target slot number (0 thru 15).
5.
Using the keypad, enter the slot number
for the traffic key stored in the KVL 3000
that you wish to map to the currently
selected target slot. After entering the
number, you may either press the Enter
key, or wait a moment and the entry will be
automatically confirmed (by the flashing
cursor moving to the first digit of the
source key number). You may also use
the
key to select NOCHG or ZERO.
Selecting NOCHG results in no changes
being made to the key residing in the
selected target slot when a load operation
is performed. Selecting ZERO results in
erasing the key residing in the selected
target slot when a load operation is
performed.
continued on next page
ZERO
4-27
Hide quick links:
Advertisement
Table of Contents
