Table of Contents
Advertisement
Viewing/Loading OTAR
Configuration
Parameters
(continued)
Note These
parame
ters are viewable only
when KMF is enabled (via
Config menu).
ASTRO 25 Operation
Chapter 7 Using KVL 3000 in OTAR Systems
Viewing a Target's TGTRSI, KMFRSI, and
MNP
In this procedure, you will connect the KVL 3000
to a target device (radio. DIU, RMC, etc.) and
view the TGTRSI, KMFRSI, and MNP currently
stored in the device.
1.
Turn on the KVL 3000 and the target
device, then connect them using the
appropriate cable.
2.
Use the
key to select TARGET from
the Main Menu. The following screen will
appear:
TARGET
LOAD
3.
Use the
or
VIEW, then press
The following screen will appear:
VIEW
KEYS
continued on next page
ZERO
keys to navigate to
to select VIEW.
TGTRSI
7-37
Hide quick links:
Advertisement
Table of Contents
