Table of Contents
Advertisement
KVL 3000 User's Guide
Share All Keys
Note If sharing at least
one DVI XL key and the
System Keys in both KVL
3000s do not match, a
screen
will
appear
prompting you to over
write the target KVL's Sys
tem Key with the source
KVL's System Key. Select
YES to proceed with the
sharing operation. Note
that old DVI XL keys in the
target KVL will be erased.
6-4
In this scenario, all TEKs and KEKs, as well as
Key Groups (if present) are transferred from the
source KVL 3000 to the target KVL 3000.
Important! In order to perform a Share All
procedure, the target KVL 3000 must support the
same algorithms (e.g., DES and DVI XL, or DES
and DVP XL) as the source KVL (assuming there is
at least one key defined for each algorithm).
Example 1: The source KVL 3000 is equipped
with DES XL, DES OFB, and DVP XL, and there is
at least one key defined for each algorithm. The
target KVL 3000 must also be equipped with
DES XL, DES OFB, and DVP XL.
Example 2: The source KVL 3000 is equipped
with DES XL, DES OFB, and DVP XL, but there are
keys defined only for DES XL. The target KVL 3000
must also be equipped with at least DES XL.
1.
With both KVL 3000s turned on and
connected
via
the
navigate to and select TARGET in the
Main Menu on the source KVL 3000. The
following screen will appear:
TARGET
LOAD
2.
Use the
key to select LOAD. The
following screen will appear:
LOAD
KEY
continued on next page
transfer
cable,
ZERO
GROUP
ASTRO 25 Operation
Hide quick links:
Advertisement
Table of Contents
