Table of Contents
Advertisement
Perform Initial
Programming
(continued)
Note Enabling
KMF
mode
causes
some
menu items to become
unhidden
(such
as
UPDATE, LIST, and KMF).
Refer to Menu Tree on
page 2-9.
ASTRO 25 Operation
Chapter 3 Performing Initial Programming
System Dependent Parameters
The parameters and settings in this category
must be set depending on the particular system
in which the KVL 3000 will be operating.
Turn KMF Mode On/Off (OTAR Only)
order to communicate with a Key Management
Facility (KMF) in an OTAR system, the KVL 3000
must have the KMF Mode turned on. Turn KMF
Mode on as follows:
1.
Navigate to the CONFIG menu, then
select KMF. The following screen will
appear:
THE KMF MODE
IS OFF.
ON
2.
Press
to select ON (or OFF) as
desired.
In
OFF
3-11
Hide quick links:
Advertisement
Table of Contents
