Saving the Active Switch Configuration
676
G8264 Command Reference for ENOS 8.4
When the copy runningconfig command is used, the switch's active
configuration commands (as displayed using show runningconfig) will be
uploaded to the specified script configuration file on the FTP/TFTP/SFTP server. To
start the switch configuration upload, at the prompt, enter:
RS G8264# copy runningconfig ftp
or:
RS G8264# copy runningconfig sftp
or:
RS G8264# copy runningconfig tftp
The switch prompts you for the server address and filename.
Note: The output file is formatted with line‐breaks but no carriage returns—the
file cannot be viewed with editors that require carriage returns (such as Microsoft
Notepad).
Note: If the FTP/TFTP/SFTP server is running SunOS or the Solaris operating
system, the specified configuration file must exist prior to executing the copy
runningconfig command and must be writable (set with proper permission,
and not locked by any application). The contents of the specified file will be
replaced with the current configuration data.