sFlow Configuration
© Copyright Lenovo 2017
Enterprise NOS supports sFlow version 5. sFlow is a sampling method used for
monitoring high speed switched networks. Use these commands to configure the
sFlow agent on the switch.
Table 176.
sFlow Configuration Options
Command Syntax and Usage
[no] sflow enable
Enables or disables the sFlow agent.
Command mode: Global configuration
sflow port <UDP port number (1‐65000)>
Configures the UDP port for the sFlow server.
The default value is 6343.
Command mode: Global configuration
default sflow port
Resets the sFlow server port to the default port number ‐ 6343.
Command mode: Global configuration
sflow server <IP address> [dataport|mgtport]
Defines the sFlow server address and interface port.
Command mode: Global configuration
no sflow server
Deletes the sFlow server address.
Command mode: Global configuration.
show sflow
Displays sFlow configuration parameters.
Command mode: All
Chapter 4: Configuration Commands
397