ECP Configuration
© Copyright Lenovo 2017
Use the following commands to configure Edge Control Protocol (ECP).
Table 236.
ECP Configuration Options
Command Syntax and Usage
ecp retransmitinterval <100‐9000>
Configures ECP retransmit interval in milliseconds.
The default value is 1000 miliseconds.
Command mode: Global configuration
default ecp retransmitinterval
Resets the ECP retransmit interval to the default 1000 milliseconds.
Command mode: Global configuration
show ecp [channels|retransmitinterval|
upperlayerprotocols]
Displays settings for the ECP retransmit interval or for all ECP channels or
registered ULPs.
Command mode: All
Chapter 4: Configuration Commands
477