Table of Contents
Advertisement
Engine Tachometer (1)
Engine tachometer (1) indicates the speed of currently
running engine in a gauge form. (200 min
If the engine is over speed, the color of the gauge changes.
ECO Indicator (2)
ECO indicator (2) lights when the engine runs in energy
efficient condition.
It turns OFF when the driving speed is 2 km/h or lower or
under heavy driving load.
f
NOTE: You may push the down shift switch when the
ECO indicator goes OFF while driving the slope or dozing
operation such as snow removal. (Refer to DSS (Down Shift
Switch) section)
Speedometer (3)
Speedometer (3) indicates the present driving speed.
Transmission Oil Temperature Gauge (4)
Transmission Oil Temperature Gauge (4) depicts
transmission oil temperature as a gauge. When the bar stays
in the blue range, the oil temperature is normal. If the oil
temperature becomes abnormally high, the alarm buzzer
will sound and the warning indicator will be displayed.
DEF/AdBlue® Level Gauge (5)
DEF/AdBlue® level gauge (5) displays the remaining DEF/
AdBlue® amount. When DEF/AdBlue® level becomes low,
the last segment turns yellow.
Air Conditioner Display (6)
Air conditioner display (6) displays operating condition of
the air conditioner.
Ride Control Indicator (7)
Ride control indicator (7) is displayed when the ride control
switch is in ON position.
Seat Belt Indicator (8)
The indicator turns ON when the key switch is turned ON,
and turns OFF 5 seconds after the engine starts.
OPERATOR'S STATION
step)
-1
1-22
1
2
3
8
7
MNFB-01-100EN
4
5
6
Advertisement
Table of Contents
