Pairing (A special Bluetooth® unit is necessary to use this
function.)
This function authenticates the Bluetooth device for use
with this device.
Pressing the [MODE] button on the setting screen to display
the "PUSH MODE" on the screen.
Pressing the [MODE] button again displays "WAIT" on the
screen. Once the special Bluetooth module of the radio
unit completes preparations, "PKEY 0000" and "BT****" are
displayed alternately on the screen.
Select the name of this device, "BT****" on the Bluetooth
device to be connected.
("****" is the 4-digit serial number of the special Bluetooth
module of the radio unit.)
Pressing the [PTY] button at any stage cancels
the pairing and it returns to the Menu screen.
If pairing is successful, "PAIR OK" is displayed on the screen.
If pairing fails, "PAIR NG" is displayed on the screen.
If there is no communication for 180 seconds after pairing
starts, "TIME OUT" is displayed on the screen.
Pressing the [PTY] buttons completes the setting and it
returns to the Menu screen.
OPERATOR'S STATION
Pairing succeeded
1-160
Menu Screen
(Set)
(Return)
(Set)
When preparation is complete
on the handsfree unit, the display
changes.
****: 4-digit serial no. of BT module
Enter the pass key
Pairing failed
Timeout (180 sec.)
(Return)
MPTC-01-081