Table of Contents
Advertisement
Taking the Machine Out of Storage
d
WARNING: If it is unavoidable to perform the
lubrication operation indoors, open windows and
doors to maintain good air ventilation to prevent
asphyxiation. Lubricant property will deteriorate
even if the machine is kept stored. Check all lubricants
before operating the machine after being stored.
Apply the parking brake while storing.
IMPORTANT:
Lubricants will deteriorate during storage of the
machine.
Thoroughly check lubricants and adequately
perform lubrication operation before resuming
operation of the machine. Avoid quick operation.
Failure to do so may cause damage to the engine,
hydraulic equipment, transmission, axle, etc. due to
insufficient lubrication.
If the lubrication operation is not performed for
more than three months, start the engine and run
the engine at slow idle speed for three minutes. Then
carry out lubrication operation for cylinders.
If you suddenly started the engine or operated the
cylinders without following the procedure above, it
may cause damage to the machine such as engine
seizure.
When turning the battery disconnect switch from
OFF to ON, preset radio station and the clock may be
reset. Set them again.
Check the DEF supply system, such as dozing module
nozzle, for clogging due to dried remaining DEF in
the line. Clean as needed. Follow the instruction by
the engine manufacturer before starting the engine
after long term storage.
STORAGE
10-2
Advertisement
Table of Contents
