Table of Contents
Advertisement
Visibility Map for Machine Model ZW330-6 series
Personal Hazard
This machine complies with the essential health and safety requirements for visibility set out by Machinery Directive
2006/42/EC. The map shows the residual maskings (blind spots) observed by a seated operator (wearing the
recommended seat restraint) in the cab using direct vision and the standard visual aids supplied with the machine.
Additionally, operators are encouraged to adjust the mirrors provided to the machine to show the area as shown below.
This map shows an approximation of the residual masking. This can be used as a guide when conducting a site risk
assessment, utilized for site management and to consider additional visual aids.
Conditions: Driver's visibility on 1mRB and VTC are evaluated under ISO 5006.
Test Height (on 1mRB):
(1mRB to VTC/on VTC):
Operator eye Height:
Machine Configuration:
Machine Position:
Applicable visual aids:
Machine Position Image
VISIBILITY MAP
1.2 m to 1.5 m
Ground Level
1.2 m from the cab floor
Standard/High lift arm
Travel Position (For the detail position, see the image below)
1. standard mirror (s)
2. standard rear view camera
A : 1 m Rectangular Boundary (1mRB)
B : 12 m Visibility Test Circle (VTC)
a : Standard Mirror (s)
b : Standard rear view camera
MNFB-VM-001
A
a
camera
visibility
field
Visibility Map
S-41
: Operator's eye point
masking
area on VTC
masking
area on RB
a
b
mirror
visibility
field
: Masking area
: Mirror visibility
: Camera visibility
: Masking on
1mRB/VTC
B
ZW330-6-VM-001
Advertisement
Table of Contents
