Table of Contents
Advertisement
Pack201 | Operator Interface | Section 4
PARAMETER
Melted Film Reject Shifts (prod)
Melted Film Time Limit
Metering % Of Correction
Metering Offset
Metric Units (on/off)
Mfg Splice # To Reject (prod)
Mfg Splice Reject Enable
Mfg Splice Reject Shifts (prod)
NGNS # To Reject
NGNS Reject Shifts
No Gap No Seal (NGNS) Enable
No Gap No Seal (NGNS) Reject (on/off)
No Gap Normal Stop Enable
No Head Jam Cycles
No Head Jam Enable
No Product No Paper (NPNP) Enable
NPNP # of Delays
NPNP Eye Max Missed
NPNP/Missing # To Reject
NPNP/Missing Shifts
Number of Cutting Heads
© Bosch Packaging Technology, Inc.
All rights reserved 2012
DEFINITION
This is number of cycles (packages) from the endseal or finseal to the
reject device�
This is the time allowed for a package to remain in the heated endseal
or finseal area before the package will be rejected.
This is a percentage of the product length that the feeder metering belt
will correct for proper product placement�
This is a correction that may be added to change the position of the
product on the metering belt�
When turned ON all screen parameter values are displayed in metric
units (millimeters)� When turned OFF all values are displayed in inch-
es�
This is the desired number of packages to reject when a manufacturers
splice is detected�
In the ON position the manufacturers splice reject eye is active� In the
OFF position the reject eye is disabled�
This is the number of cycles from the manufacturers splice reject eye to
the reject device�
This is the desired number of packages to reject when a missing prod-
uct gap is detected�
This is the number of cycles from the NGNS reject eye to the reject
device�
In the ON position the No Gap No Seal option is active� In the OFF posi-
tion the option is disabled�
In the ON position the NGNS reject eye is active� In the OFF position the
reject eye is disabled�
When enabled the NGNS feature will cause the wrapper to go to a nor-
mal stop�
This is the number of packages that will pass through the cutting head
before the crimpers start rotating again�
In the ON position the no jam option is active� In the OFF position the
option is disabled�
In the ON position the No Product No Paper option is active� In the OFF
position the option is disabled�
This is the number of cycles (packages) between the NoProduct No
Paper eye and the former (+ or - 1)�
This is the maximum number of consecutive missing products the
NPNP/Missing eye can detect before the wrapper is stopped�
This is the desired number of packages to reject when a missing prod-
uct is detected�
This is the number of cycles from the NPNP/missing reject eye to the
reject device�
This is the number of sealing crimpers used on the cutting head�
EN | 48
Hide quick links:
Advertisement
Chapters
Table of Contents
