Further settings
Increased water
level
Interim rinse
80
It is advisable to increase the water level when a lot of water is ab-
sorbed due to the structure of the load items, in the event of heavy
soiling or when the type of stain (e.g. blood) and the process chemic-
als used lead to excess foam development. The additional volume of
water depends on the type of basket or mobile unit used, the type of
stain and the load items.
...
Change volume of water
The volume of water can be modified in increments of 0.5 l. The pos-
sible range is shown in the bottom line of the display.
Use the (higher) and (lower) arrow buttons to adjust the
volume of water.
Press OK to save the setting.
Some programmes have the option of adding an extra interim rinse
(see "Programme chart").
...
Interim rinse
No
-
The additonal interim rinse block is deactivated.
Yes
-
The additional interim rinse block is activated for all applicable pro-
grammes.
Select an option using the and arrow buttons.
Press OK to save the setting.
Increased water level
0.0
l
(0.0 - 1.5 l )
Interim rinse
No
Yes