Table of Contents
Advertisement
Areas of application
Adjusting the up-
per basket
To adjust the upper
basket:
... Upper position:
34
Height-adjustable upper baskets can be adjusted between three pos-
itions with 2 cm between each position to accommodate items of dif-
ferent heights.
To adjust the height, the brackets with rollers on the side of the upper
basket and the water connector at the back of the basket have to be
moved. The roller brackets are each secured to the upper basket by
two screws. The water connector consists of the following compon-
ents:
- A stainless steel plate with 2 apertures,
- a plastic connection piece and
- 6 screws.
Only adjust the upper basket horizontally. The baskets are not de-
signed to be positioned on a slant (one side up, one side down).
Altering the height will alter loading heights for both the upper and
lower baskets.
Remove the upper basket by pulling it out until a resistance is felt
and lifting it off the runners.
Unscrew the roller brackets and the water connector.
To adjust the upper basket to the ...
Move the roller brackets on both sides to the lower position and se-
cure them firmly.
Position the stainless steel plate over the openings in the water
supply pipe so that the upper aperture is covered. Secure the stain-
less steel plate at the top with 2 screws. Place the water connector
in the lower aperture of the stainless steel plate so that the middle
aperture is covered. Secure the water connector with 4 screws.
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
