Table of Contents
Advertisement
Operation
Top line
Middle line
Bottom line
Top line
Middle line
Bottom line
Ending the pro-
gramme
58
Programme sequence indicator
After the programme has started, the programme sequence can be
followed on the three-line display.
- Programme name.
The following parameters can be checked using the and arrow
buttons:
- Current programme block, e.g.
- Actual or required temperature
(depending on the display set, see "Further settings/Display: Tem-
perature")
- Time left (in hours; under an hour, in minutes).
At the end of the programme
The following messages and parameters appear at the end of a pro-
gramme:
- Programme name.
- Temperature
(required temperature of the final wash phase)
- Programme finished.
The LED in the Start/Stop button goes out. In the factory default
state, an acoustic tone also sounds for approx. 10 seconds (see "Set-
tings/Volume").
Open the door to end the programme. The machine must be
switched on when you do this.
Sf Special
Main wash
Time left
15
Main wash
Min
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
