Table of Contents
Advertisement
Further settings
78
Additional functions
You can use this menu to customise the current programme to suit
technical requirements and the load items or to reset all additional
functions to the factory default settings.
Additional specialist knowledge is required to alter programme set-
tings and this should therefore be undertaken only by experienced
users or by the Miele Customer Service Department.
Only make changes to programmes in consultation with the manu-
facturers of the air regulators and breathing masks or with Miele.
Open the
Further settings
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Additional functions
Reset
-
All parameters that have been set under "Additional functions" will
be reset to the factory setting.
Increased water level
-
The water level will be increased for all programmes.
Interim rinse
-
All programmes that this option is intended for will have an extra in-
terim rinse stage (see the programme chart).
Dispensing system
-
Vent the dispensing system and rename it.
Temperature / time
-
Adjust the temperature and holding time for the Main wash or Final
rinse programme block.
Use the and arrow buttons to select an option and confirm
your selection with OK.
See the next section for details of how to continue.
menu by switching the machine off with
Additional functions
Reset
Increased water level
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
