Table of Contents
Advertisement
2-3. Cassette Compartment Removal/Installation
Installation
10. Set the harness of the connector (CN930) disconnected
in step 6 so it is not put between chassis.
11. Install the cassette compartment inserting slantingly in
the direction as shown in the figure.
12. Insert the four legs of the cassette compartment for
fixing the position into the four holes of the mechanical
chassis for fixing the position by pressing the C
portions (two portions) as shown in the figure.
13. After confirming that the cassette compartment is fixed
to the chassis, install the cassette compartment bracket
assembly.
n
When looked down on from the top, check that the two
leaf springs are pressed by the two projections on the
cassette compartment.
14. Connect the connector (CN930) on the CL-29 board.
Cassette lid
Leg for fixing
position
Hole for fixing
position
Flexible card wire
Installation of the Cassette Compartment
2-6
Cassette compartment
Connector
(CN930)
Advertisement
Table of Contents
