Table of Contents
Advertisement
1-10. Installation of BKDW-510/511
4. Pull out the cushion block of the control panel case
forward.
5. Connect the harness of the control panel to the
connector at the end of the remote cable fixed in step 2.
6. Put the lower control panel into the control panel case.
7. Return the cushion block to the former position and
tighten the two knob screws at the bottom to fix.
Lower control panel
Control panel case
Control panel case
Installation of Lower Control Panel
1-18
Cushion block
Remote cable
Harness of lower
control panel
Connector
8. Tighten the two screws of the metal plating shell and
connect the remote cable to the connector
(CONTROL PANEL) on the connector panel.
Screws
CONTROL PANEL Connector
Connection of Remote Cable
Setting After Installation
• This unit is set to the EXT operation using the
CONTROL PANEL switch on the system setup panel.
Metal plating shell
Remote cable
Advertisement
Table of Contents
