Sony CCP-8000 Installation Manual page 45
Center control panel pack
Hide thumbs
Also See for CCP-8000:
- User manual (563 pages) ,
- System setup manual (134 pages) ,
- Operation manual (36 pages)
Table of Contents
Advertisement
2. Installation to the AUX Panel
Applicable Modules
Refer to subsection "Applicable modules" of "1. Installa-
tion to the main panel".
Installation
1. Remove the panel covers (L) and (R) from both sides
of the operation module that you want to remove. (Pull
the operation panel up by inserting fingers into the
recessed handle on the sides.)
2. Loosen the four screws (with drop-safe) fixing the
operation module.
3. Remove the operation module by holding the two
screws on the sides of the operation module.
4. Fit the operation module that you want to install into
the position as described in step 3. Fix the operation
module by tightening the four screws (with drop-safe)
on both sides.
5. Install the panel cover.
n
When two or more operation modules have already
been installed in the AUX panel, follow the procedure
as described in subsection "Applicable modules" of "1.
Installation to the main panel" to install the side that
sits next to the adjoining operation module.
Panel cover (L)
Operation module
Screws
(with drop-safe)
CCP-8000 IM
3. Installation to the MKS-8075 (Extension adaptor)
Applicable modules
. MKS-8026
. MKS-8030
. MKS-8031JS
. MKS-8031TB Track Ball Module
. MKS-8032
. MKS-8033
. MKS-8035
Installation
1. Remove the module cover on both sides of the opera-
2. Loosen the four screws (with drop-safe) fixing the
3. Remove the operation module by holding the two
4. Fit the operation module that you want to install into
5. Install the module cover. (When you want to install the
Panel cover (R)
Screws
(with drop-safe)
2-4. Installing the Operation Modules
10 Key Pad Module
Key Frame Module
Joystick Module
DKS Fader Module
Utility/Shotbox Module
Key Control Module
tion module that you want to remove, as shown.
operation module.
screws on the sides of the operation module.
the position as described in step 3. Fix the operation
module by tightening the four screws (with drop-safe)
on both sides.
MKS-8031TB, go to *1 on next page.)
Module covers
Screws
(with drop-safe)
MKS-8075
*1
(Refer to page 2-6.)
Operation module
Screws
(with drop-safe)
2-5
Hide quick links:
Advertisement
Table of Contents
