Sony CCP-8000 Installation Manual page 31
Center control panel pack
Hide thumbs
Also See for CCP-8000:
- User manual (563 pages) ,
- System setup manual (134 pages) ,
- Operation manual (36 pages)
Table of Contents
Advertisement
<LED>
D7 (A-3) : + + + + + 3.3 V
+3.3 V power supply status indication.
Lit when the +3.3 V power is supplied.
D8 (A-3) : + + + + + 12 V
+12 V power supply status indication.
Lit when the +12 V power is supplied.
If this LED does not light, the fuse may have blown.
D9 (A-3) : + + + + + 2.5 V
+2.5 V power supply status indication.
Lit when the +2.5 V power is supplied.
D10 (A-3) : + + + + + 5 V
+5 V power supply status indication.
Lit when the +5 V power is supplied.
D251 (A-5) : 100/RESET/S-BUS TX/S-BUS RX
Lit while the 100 Mb/s communication with the MENU
CPU is in progress.
D316 (A-9) : HD
Lit when the reference signal that is connected to the REF
IN connector is an HD signal.
D317 (A-9) : REF_OK status LED
REF IN signal presence/absence status indication.
Lit when an REF signal is input via the REF IN connector.
D400 (A-10) : CH0
Flashes while communication with the equipment that is
connected to the EDITOR PANEL terminal is in progress.
D401 (A-10) : SIO
EDITOR PANEL communication IC status indication
Lit :
The IC has not started up correctly.
Not lit :
The IC has started up correctly.
Flashing : Memory is faulty.
D480 (A-7) : CTRL CPU status LED
CTRL terminal communication IC status indication.
Used only for production in the assembly factory.
D481 (A-7) : CTRL CPU status LED
CTRL terminal communication IC status indication.
Used only for production in the assembly factory.
D482 (A-7) : CTRL CPU status LED
CTRL terminal communication IC status indication.
Used only for production in the assembly factory.
CCP-8000 IM
1-10. Checks on Completion of Installation
D483 (A-7) : CTRL CPU status LED
CTRL terminal communication IC status indication.
Used only for production in the assembly factory.
D500 (A-7) : LAN status LED
LAN status indication.
Flashes while communication with the equipment that is
connected to the CTRL terminal is in progress.
D501 (A-7) : 100
Lit while the 100 Mb/s communication with the equipment
that is connected to the CTRL terminal is in progress.
D610 (A-8) : PERIPH CPU status LED
PERIPH terminal communication IC status indication.
Used only for production in the assembly factory.
D611 (A-8) : PERIPH CPU status LED
PERIPH terminal communication IC status indication.
Used only for production in the assembly factory.
D612 (A-8) : PERIPH CPU status LED
PERIPH terminal communication IC status indication.
Used only for production in the assembly factory.
D613 (A-8) : PERIPH CPU status LED
PERIPH terminal communication IC status indication
Used only for production in the assembly factory.
D640 (A-8) : LAN status LED
LAN status indication.
Flashes while communication with the equipment that is
connected to the PERIPH terminal is in progress.
D641 (A-8) : 100
Lit while the 100 Mb/s communication with the equipment
that is connected to the PERIPH terminal is in progress.
D916 (A-5) : MAIN CPU status LED
Main CPU status indication.
Used only for production in the assembly factory.
D917 (A-5) : MAIN CPU status LED
Main CPU status indication.
Used only for production in the assembly factory.
D918 (A-5) : MAIN CPU status LED
Main CPU status indication.
Used only for production in the assembly factory.
1-23
Hide quick links:
Advertisement
Table of Contents
