Terminal Module Tm31; Terminal Module Tm41 - Siemens SINAMICS S120 Commissioning Manual
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Diagnostics
5.2 Diagnostics using LEDs
5.2.4.2
Terminal Module TM31
Table 5- 29
Meanings of the LEDs on the Terminal Module TM31
LED
Color
READY
-
Green
Orange
Red
Green/re
d
Green/
orange
or
Red/
orange
The parameters for activating component recognition using LEDs can be taken from the following reference:
1)
Reference: SINAMICS S120/S150 List Manual
5.2.4.3
Terminal Module TM41
Table 5- 30
Meaning of the LEDs on the Terminal Module TM41
LED
Color
READY
-
Green
Orange
Red
Green/re
d
258
Status
Off
The electronics power supply is missing or outside the
permissible tolerance range.
Continuous
The component is ready for operation. Cyclic DRIVE-CLiQ
light
communication is taking place.
Continuous
DRIVE-CLiQ communication is being established.
light
Continuous
This component has at least one fault.
light
Note:
The LED is activated irrespective of whether the corre-
sponding messages have been reconfigured.
Flashing
Firmware is being downloaded.
light 0.5 Hz
Flashing
Firmware download is complete. The system waits for
light 2 Hz
POWER ON.
Flashing
Component recognition via LED is activated
light
Note:
Both options depend on the LED status when component
recognition is activated.
Status
Off
The electronics power supply is missing or outside the
permissible tolerance range.
Continuous
The component is ready for operation. Cyclic DRIVE-CLiQ
light
communication is taking place.
Continuous
DRIVE-CLiQ communication is being established.
light
Continuous
This component has at least one fault.
light
Note:
The LED is activated irrespective of whether the corre-
sponding messages have been reconfigured.
Flashing
Firmware is being downloaded.
light 0.5 Hz
Flashing
Firmware download is complete. The system waits for
light 2 Hz
POWER ON.
Description, cause
.
1)
Description, cause
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Remedy
–
–
–
Correct and
acknowledge the fault.
–
Carry out a POWER
ON.
–
Remedy
–
–
–
Correct and
acknowledge the fault.
–
Carry out a POWER
ON.
Commissioning with Startdrive
- Quick Links:
- Preface
Hide quick links:
Advertisement
Table of Contents
