Siemens SINUMERIK 840DE sl Commissioning Manual page 558
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840DE sl:
- Function manual (356 pages) ,
- Commissioning manual (184 pages) ,
- Manual (92 pages)
Table of Contents
Advertisement
Technologies and cycles
21.5 Turning
Lathe with X and Z axes, main and tool spindle
For example, for a lathe with X and Z axes, main spindle (C1) and tool spindle (WZ), you can
configure the following channel-specific machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
Lathe with X and Z axes, main and tool spindle and counterspindle
For example, for a lathe with X and Z axes, main spindle (C1), tool spindle (WZ) and
counterspindle (C2), you can configure the following machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
[5] = C2
Lathe with X and Z axes, main and tool spindle and Y axis
For example, for a lathe with X, Z and Y axes, main spindle (C1) and tool spindle (WZ), you
can configure the following machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
[5] = YC
21.5.8
Cylinder surface transformation (TRACYL)
Function
Using the cylinder surface transformation function (TRACYL), you can machine the peripheral
surface of a turned part.
544
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Counterspindle C2
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Channel axis YC
Software option
You require the following software option in order to use this function:
"Transmit and peripheral surface transformation"
Channel axis name in the channel
Channel axis name in the channel
Channel axis name in the channel
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)
Advertisement
Table of Contents
