Siemens SINUMERIK 840DE sl Commissioning Manual page 143
Basesoftware and operating software
Hide thumbs
Also See for SINUMERIK 840DE sl:
- Function manual (356 pages) ,
- Commissioning manual (184 pages) ,
- Manual (92 pages)
Table of Contents
Advertisement
Only programming G code programs
If the job list only contains G code programs, then you can deactivate the "multi-channel data"
function. To do this, set the following machine data:
MD51228 $MNS_FUNCTION_MASK_TECH
Bit 0
8.10
Manual machine
General information
"Manual machine" allows you to work with large cycles in manual mode without having to write
programs especially for this purpose.
Activation
MD52212 $MCS_FUNCTION_MASK_TECH
Bit 8
Enables
MD52214 $MCS_FUNCTION_MASK_MILL
Bit 5
Bit 6
MD52218 $MCS_FUNCTION_MASK_TURN
Bit 3
Bit 4
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
G code programming without multi-channel data
= 1 Multi-channel data are not listed for job lists that only contain G code programs. The "multi-
channel data" softkey is not displayed.
Software option
You require the following software option in order to use this function:
"ShopMill/ShopTurn"
Manual machine (ShopMill/ShopTurn)
Enable spindle control, tool spindle
= 0 via the NC/PLC interface
= 1 via the user interface
Enable spindle control, rotating spindle
= 0 via the NC/PLC interface
= 1 via the user interface
Enable spindle control, main spindle
= 0 via the NC/PLC interface
= 1 via the user interface
Enable spindle control, counterspindle
= 0 via the NC/PLC interface
= 1 via the user interface
Customizing the "Machine" operating area
Cross-technology function mask
Cross-technology function mask
Milling function screen
Turning function screen
8.10 Manual machine
129
Advertisement
Table of Contents
