Configuring Password Authentication For Console Login - HP A-F1000-E Getting Started Manual
High-end firewalls
Hide thumbs
Also See for A-F1000-E:
- Product end-of-life disassembly instructions (3 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Configuration procedure
Follow these steps to configure none authentication for console login:
To do...
Enter system view
Enter console user interface view
Specify the none authentication
mode
Configure common settings for
console login
After the configuration, the next time you log in to the device through the console port, you are prompted
to press enter. A prompt such as <HP> appears after you press Enter, as shown in
Figure 14 Configuration page
Configuring password authentication for console login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see
"Configuration
Use the command...
system-view
user-interface console first-number
[ last-number ]
authentication-mode none
—
requirements."
15
Remarks
—
—
Required
By default, you can log in to the
device through the console port
without authentication, and have
user privilege level 3 after login.
Optional
See
"Configuring common settings
for console login
(optional)."
Figure
14.
- Quick Links:
- Firewall A-F1000
Hide quick links:
Advertisement
Table of Contents
