Table of Contents
Advertisement
2
Product Scope
3
Unpacking
4
External Indication
4.1
DR60 Nameplate
8
The DR60 a single-box solution for Digital Recording. The solution is designed for the
acquisition, monitoring and recording of electrical quantities normally associated with
electrical power generation, transmission or distribution equipment. The DR60 is
designed fan-less and no rotating part components. It has a 16-bit acquisition system
that provide an acquisition rate of 256 or 512 samples/cycle synchronized by the IRIG-B
or IEEE 1588 PTPv2.
The DR60 has a very flexible architecture with several different boards with allows the
customer to choose the most cost-effective solution for each application. Depending on
the boards combination, the DR60 can offer: up to 32 analog channels, 96 digital
channels and 48 digital outputs
The DR60 is a native IEC 61850 device, which means that all its internal variables follow
the data models and logical nodes described in the IEC 61850 edition 2. The DR60 is
able to publish and subscribe to GOOSE messages, as well as publish Report control
blocks for supervisory system integration.
It allows communication through the electrical Ethernet ports or optical interfaces.
Unpack the equipment carefully and make sure that all accessories and cables are put
away so they will not be lost.
Check the contents against the packing list. If any of the contents listed is missing,
please contact GE immediately (see contact information at the beginning of this
manual).
Examine the equipment for any shipping damage. If the unit is damaged or fails to
operate, notify the shipping company immediately. Only the consignee (the person or
company receiving the unit) can file a claim against the carrier for occasional shipping
damages.
We recommend that the user retain the original packing materials for use in case of
need to transport or ship the equipment at some future time.
Information about the company, power supply, the serial number and part number is
shown on a small nameplate affixed to the rear of the equipment, as shown in figure
below.
DR60-TM-EN-2A
- Quick Links:
- Dr60 Configurator Tool
Hide quick links:
Advertisement
Table of Contents
