Changing Radio Functions; Screen Descriptions; Group 1-Startup Screen And Menu Directory; Group 2-Configuration Screens - GE MDS 4790 Series Installation & Operation Manual

400 mhz/900 mhz multiple address system master station radio
Table of Contents

Advertisement

TX [xxxx]
command,
Page 58
This graphic points you
to the corresponding PC
command
64
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx
—Cancels the current radio functionality selection
ESCAPE
before you press the
• Up/down arrow buttons (
able choices. Pressing the
choice is displayed reconfigures the radio using that setting.

Changing radio functions

1. When an individual menu screen is shown, press the
The message
change pending
This indicates that the next series of arrow button presses will make
on-screen selections and will not display menu screens.
2. Most options are either words ("enabled," "disabled") or numbers.
The instructions below apply in most situations; if not, the method
for choosing an option is detailed in the screen description.
Word options. To display all choices when the options are words,
press the up or down
Numeric options. If the option is more than one digit, first select
the digit to change: press the left or right arrow
move the cursor ( _ ) under the digit to change (for example, to
change
to
, move the cusor under the
30
40
down
arrow buttons to increase or decrease the number, or
hold down the arrow button to scroll through choices more rapidly.
3. Press the
button again when the desired choice is shown (or
ENTER
press the
button to cancel the change). The message
ESCAPE
appears, indicating that the change was successful.

6.5 Screen Descriptions

This section describes each front panel display screen. The commands
refer to the descriptions of corresponding commands entered from a
connected PC using the graphic at left.
These screens are presented in four major groups:
Group 1—Startup Screen and Menu Directory
These screens are starting points for all programming and viewing activ-
ities.
Group 2—Configuration Screens
Use the Configuration screens to view or define the radio's operating
parameters.
MDS 4790/9790 Series I/O Guide
button a second time.
ENTER
)—Cycles through the avail-
button when a particular
ENTER
appears at the bottom of the screen.
arrow button.
). Then press the up or
3
(Page
68)
MDS 05-3438A01, Rev. F
button.
ENTER
button to
done
(page
68)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents