Table of Contents
Advertisement
12.3
Construction
Construction
How does it work?
Range of stroke (linear actuator)
•
Angle of rotation (part-turn actuator)
•
Mounting method
On the linear actuator
•
On the part-turn actuator
•
Weight, positioner without option modules or accessories
6DR5..0 Glass-fiber reinforced polycarbonate enclosure
•
6DR5..1 aluminum enclosure, narrow
•
6DR5..2 stainless steel enclosure
•
6DR5..3 aluminum enclosure
•
6DR5..5 aluminum enclosure, flameproof
•
Material
Enclosure
•
6DR5..0 Makrolon
6DR5..1 aluminum, narrow
6DR5..2 stainless steel
6DR5..3 aluminum
6DR5..5 aluminum, flameproof
Pressure gauge block
•
Versions
In Makrolon enclosure 6DR5..0
•
In aluminum enclosure 6DR5..1
•
In aluminum enclosure 6DR5..3 and 6DR5..5
•
In stainless steel enclosure 6DR5..2
•
Torques
Part-turn actuator fixing screws DIN 933 M6x12-A2
•
Linear actuator fixing screws DIN 933 M8x16-A2
•
Gland pneumatic G¼
•
SIPART PS2 with and without HART
Operating Instructions, 09/2014, A5E00074631-12
3 ... 130 mm (0.12 ... 5.12") (angle of rotation of the posi-
tioner shaft 16 to 90°)
30 ... 100°
Using mounting kit 6DR4004-8V and, where necessary,
an additional lever arm 6DR4004-8L on actuators accord-
ing to IEC 60534-6-1 (NAMUR) with a fin, columns, or a
plane surface.
Using mounting kit 6DR4004-8D on actuators with mount-
ing plane according to VDI/VDE 3845 and IEC 60534-6-2:
The required mount must be provided on the actuator-
side.
Approximately 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approx. 3.9 kg (8.6 lb)
Approx. 1.6 kg (3.53 lb)
Approx. 5.2 kg (11.46 lb)
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel 316Cb, mat. No. 1.4581
GD AlSi12
GK AISi12
Aluminum AIMgSi, anodized
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
15 Nm (11.1 ft lb)
Technical data
12.3 Construction
243
Advertisement
Table of Contents
