6.4.2.2 The Operator Account
The Operator account is provided to for day-to-day management of the moisture.IQ. By default, the Operator
has all the same privileges as the Admin , but cannot create or modify other accounts. The Operator account
allows the user to:
•
Enable/Disable DHCP
•
Specify a static IP, subnet, and gateway IP address
•
Modify some of the serial protocol settings
•
View the serial port connection status
•
View the TCP/IP connection status
•
View the Ethernet option firmware version, serial port and network diagnostics.
The default login credentials for the Operator account are:
•
User name: Operator
•
Password: password
The Operator password should be changed at the earliest opportunity. The steps for changing the Operator
password are the same as for changing the Admin password (see previous section). Select the Operator account
from the Web User Management screen (see Figure 71 on page 80), then enter and confirm the new password.
Record the new operator password immediately, and keep it in a safe and secure location.
Note: If the operator password is lost, it can be reset using the Admin account.
moisture.IQ User's Manual
Chapter 6. Setting Up Communications
81