Specific Search In The Tool Management Lists - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
...
11.13
Specific search in the tool management lists
There is a search function in all tool management lists, where you can search for the following
objects:
● Tools
– You enter a tool name. You can narrow down your search by entering a replacement
– Enter the D number and, if necessary, activate the "Active D number" checkbox.
● Magazine locations or magazines
If only one magazine is configured, then the search is only made for the magazine location.
If several magazines are configured, then it is possible to search a specific magazine
location in a specific magazine or just to search in a specific magazine.
● Empty locations
If the lists with the location type are used, then the empty location search is made using
the location type and location size.
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
3.
Press the ">>" and "Filter" softkeys.
The "Filter" window opens.
4.
Activate the required filter criterion and press the "OK" softkey.
The tools that correspond to the selection criteria are displayed in the list.
The active filter is displayed in the window header.
tool number.
You have the option of only entering a part of the name as search term.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
11.13 Specific search in the tool management lists
Tool management
249
Advertisement
Table of Contents
