Creating A New Tool - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
SINUMERIK Operate Commissioning Manual
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green frame
Magazine/location number
Green double arrow
Gray double arrow (con‐
figurable)
Red "X"
Procedure
11.5.1
Creating a new tool
When creating a new tool, the "New tool - favorites" window offers you a number of selected
tool types, known as "favorites".
If you do not find the desired tool type in the favorites list, then select the milling, drilling or
special tool using the corresponding softkeys.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
1..
The tool list is opened.
2.
Place the cursor in the tool list at the position where the new tool should
be stored.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Tool management
11.5 Tool list
223
Advertisement
Table of Contents
