New Shopturn Program; Storing Any New File - Siemens sinumerik 840D sl Operating Manual

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

New ShopTurn program

In the part program and workpiece directories, you can create ShopTurn programs and then

subsequently generate the machining steps for them.

In each directory or subdirectory you can create a file in any format that you specify.

This does not apply to the NC memory. Here you can create the following file types under a

workpiece using the "Any" softkey.

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Select the "Program Manager" operating area.

Select the desired storage location and position the cursor on the

folder, in which you would like to store the program.

Press the "New" softkey.

Press the "ShopTurn" softkey.

The "New step sequence program" window opens.

The "ShopTurn" type is specified.

Enter the desired program name and press the "OK" softkey.

The program name can contain up to 28 characters (name + dot + 3-

character extension).

You can use all letters (with the exception of special characters,

language-specific special characters, Asian or Cyrillic characters),

numbers and underscores (_).

14.4 Creating a directory/program/joblist/program list

Program management

Show Quick Links

Table of Contents

Sinumerik 828d