Siemens sinumerik 840D sl Operating Manual page 480

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

Multi-channel support

9.3 Multi-channel editor

Settings for a program block

(only for ShopTurn

supplementary code

(only for ShopTurn

Automat. retraction

(only for ShopTurn

Opening and closing blocks

Block designation

Spindle assignment. Defines at which spindle a program block is to be

For the case that the block is not executed, as the specified spindle should

not be processed, then it is possible to temporarily activate a so-called

"running-in – supplementary code".

Block start and block end are moved to the tool change point, i.e. the tool

is brought into a safe range.

Select the "Program Manager" operating area.

Select the archiving location and create a program or open a program.

The program editor is opened.

Select the required program blocks, which you wish to combine to

form a block.

Press the "Form block" softkey.

The "Form block" window is opened.

If you structure a G code program, enter a designation for the block

and press the "OK" softkey.

If you structure a ShopTurn program, enter a designation for the block,

assign the spindle, if required, select the run-in supplementary code

and the automatic retraction and then press the "OK" softkey.

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Show Quick Links

Table of Contents

Sinumerik 828d