T,F,S Window - Siemens sinumerik 840D sl Operating Manual

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

Introduction

1.4 User interface

T,F,S window

The most important data concerning the current tool, the feedrate (path feed or axis feed in

JOG) and the spindle are displayed in the T, F, and S windows.

Rapid traverse

Name of current tool

Location number of current tool

Cutting edge of the current tool

The tool is displayed with the associated tool type symbol corresponding to

the actual coordinate system in the selected cutting edge position.

If the tool is swiveled, then this is taken into account in the display of the

cutting edge position.

In DIN-ISO mode the H number is displayed instead of the cutting edge

H number (tool offset data record for DIN-ISO mode)

If there is a valid D number, this is also displayed.

Diameter of current tool

Radius of the actual tool

Z value of the actual tool

X value of the actual tool

Feed disable

Actual feed value

If several axes traverse, is displayed for:

"JOG" mode: Axis feed for the traversing axis

"MDA" and "AUTO" mode: Programmed axis feed

G0 is active

No feed is active

Display as a percentage

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Show Quick Links

Table of Contents

Sinumerik 828d