Position Pattern Line (Holes1), Grid Or Frame (Cycle801) - Siemens sinumerik 840D sl Operating Manual
Turning
Hide thumbs
Also See for sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Parameters
Description
Peripheral surface C - cylindrical:
C0
C coordinate of 1st position (abs)
Z0
1. Position of hole with reference to Z axis (abs)
C1
...C7
C coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated.
Z1
... Z7
Additional positions in the Z axis (abs or inc)
(only for
Incremental dimension: The sign is also evaluated.
ShopTurn)
Peripheral surface Y:
X0
Reference point in X direction (abs)
C0
Reference point
Y0
Y coordinate of 1st position (abs)
Z0
Z coordinate of 1st position (abs)
Y1
...Y7
Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated.
Z1
...Z7
Z coordinate for additional positions (abs or inc)
(only for
Incremental dimension: The sign is also evaluated.
ShopTurn
8.1.11
Position pattern line (HOLES1), grid or frame (CYCLE801)
Function
You can program the following pattern using the "Position pattern" cycle:
● Line (HOLES1)
● Grid (CYCLE801)
● Frame (CYCLE801)
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
In the "Line" selection option you can program any number of positions at equal distances
along a line.
You can use the "Grid" selection option to program any number of positions spaced at an
equal distance along one or several parallel lines.
If you want to program a rhombus-shaped grid, enter angle αX or αY.
You can use the "Frame" selection option to program any number of positions spaced at
an equal distance on a frame. The spacing may be different on both axes.
If you want to program a rhombus-shaped frame, enter angle αX or αY.
Programming technology functions (cycles)
8.1 Drilling
Unit
Degrees
mm
Degrees
mm
mm
Degrees
mm
mm
mm
mm
273
- Quick Links:
- Keys of the Operator Panel
Hide quick links:
Advertisement
Table of Contents
