Siemens sinumerik 840D sl Operating Manual page 450

Hide thumbs Also See for sinumerik 840D sl:

Table of Contents

Programming technology functions (cycles)

8.7 Further cycles and functions ShopTurn

Straight line with selected radius

compensation

If you want to prevent deviation from the programmed path, you can program the first

straight line with radius compensation or with deactivated radius compensation outside the

workpiece. Programming without coordinate data is not possible.

The ShopTurn program to be processed has been created and you

are in the editor.

Press the menu forward key and the "Straight Circle" softkey.

Press the "Polar" and "Straight Polar" softkeys.

Press the "Rapid traverse" softkey if you want to use rapid traverse

instead of a programmed machining feedrate.

Distance to the pole, end point

Polar angle to the pole, end point (abs) or

Polar angle change to the pole, end point (inc)

The sign specifies the direction.

Machining feedrate

Straight line with deselected radius

compensation

Operating Manual, 07/2010, 6FC5398-8CP40-0BA0

Show Quick Links

Table of Contents

Sinumerik 828d