Displaying The Zero Offset "Overview - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Setting up the machine
4.8 Zero offsets
This window is generally used only for monitoring.
The availability of the offsets depends on the setting.
Procedure
Note
Further details on zero offsets
If you would like to see further details about the specified offsets or if you would like to change
values for the rotation, scaling or mirroring, press the "Details" softkey.
4.8.2
Displaying the zero offset "overview"
The active offsets or system offsets are displayed for all axes that have been set up in the
"Work offset - overview" window.
In addition to the offset (course and fine), the rotation, scaling and mirroring defined using this
are also displayed.
This window is generally used only for monitoring.
Display of active work offsets
Work offsets
DRF
Rotary table reference
90
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Zero offset" softkey.
The "Zero Offset - Active" window is opened.
Displays the handwheel axis offset.
Displays the additional work offsets programmed with $ P_PART‐
FRAME.
Operating Manual, 05/2017, A5E40868721
Turning
- Quick Links:
- Operator Panel Fronts
Hide quick links:
Advertisement
Table of Contents
