Siemens SINUMERIK 840D sl Operating Manual page 403

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Allowance for pre-finishing - (only for ∇∇∇)

Compensation allowance in X and Z direction (inc) – (only for allowance)

● Positive value: Compensation allowance is retained

● Negative value: Compensation allowance is removed in addition to finishing

Set machining area

Set machining area limits

With limited machining area only, yes:

1st limit XA ∅

2nd limit XB ∅ (abs) or 2nd limit referred to XA (inc)

1st limit ZA

2nd limit ZB (abs) or 2nd limit referred to ZA (inc)

Machine relief cuts

Insertion feedrate, relief cuts

* Unit of feedrate as programmed before the cycle call

Parameters in the "Input simple" mode

G code program parameters

Name of the program to be generated

Retraction plane – (only for

machining direction, longitu‐

dinal, inner)

Operating Manual, 05/2017, A5E40868721

U1 contour allowance

Programming technology functions (cycles)

ShopTurn program parameters

Cutting edge number

Spindle speed or constant cutting

10.3 Contour turning

Show Quick Links

Table of Contents

Sinumerik 828d