Zero Offsets - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Setting up the machine
4.8 Zero offsets
See also
Logging tool measurement results (Page 83)
Logging measurement results for the workpiece zero (Page 86)
4.8
Zero offsets
Following reference point approach, the actual value display for the axis coordinates is based
on the machine zero (M) of the machine coordinate system (Machine). The program for
machining the workpiece, however, is based on the workpiece zero (W) of the workpiece
coordinate system (Work). The machine zero and workpiece zero are not necessarily identical.
The distance between the machine zero and the workpiece zero depends on the workpiece
type and how it is clamped. This zero offset is taken into account during execution of the
program and can be a combination of different offsets.
Following reference point approach, the actual value display for the axis coordinates is based
on the machine zero of the machine coordinate system (Machine).
The actual value display of the positions can also refer to the SZS coordinate system (settable
zero system). The position of the active tool relative to the workpiece zero is displayed.
88
3.
Press the menu forward key and the "Settings" softkey.
4.
Press the "Measurement log" softkey.
The "Settings for measurement log" window is opened.
5.
Position the cursor to the log format field and select the required entry.
6.
Position the cursor to the log data field and select the required entry.
7.
Position the cursor to the log archive field and press the softkey "Select
directory".
8.
Navigate to the desired directory for the log archive.
9.
Press the "OK" softkey and enter the name for the log file.
Operating Manual, 05/2017, A5E40868721
Turning
- Quick Links:
- Operator Panel Fronts
Hide quick links:
Advertisement
Table of Contents
