Siemens SINUMERIK 840D sl Operating Manual page 291
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
Parameter
Description
Machining posi‐
● Single position
tion
(only for G
Drill hole at programmed position
code)
● Position pattern
Position with MCALL
Z0 (only for G
Reference point Z
code)
Machining
● Face C
surface
● Face Y
(only for Shop‐
● Peripheral surface C
Turn)
● Peripheral surface Y
Position
● At the front (face)
(only for Shop‐
● At the rear (face)
Turn)
● Outside (peripheral surface)
● Inside (peripheral surface)
Clamp/release spindle
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
Centering
● Diameter (centered with reference to the diameter)
The angle for the center drill entered in the tool list is applied.
● Tip (centered with reference to the depth)
The drill is inserted into the workpiece until the programmed insertion depth is reached.
∅
It is inserted into the workpiece until the diameter is correct. - (for diameter centering only) mm
Turning
Operating Manual, 05/2017, A5E40868721
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Centering" softkey.
The "Centering" input window opens.
mm
mm
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cutting
rate
10.1 Drilling
mm/min
mm/rev
rpm
m/min
Unit
mm
291
- Quick Links:
- Operator Panel Fronts
Hide quick links:
Advertisement
Table of Contents
