The colored symbols
Red arrow = tool traverses in rapid traverse
Green arrow = tool traverses with the machining feedrate
Parameter screen with graphic view
Figure 8-3
See also
Editor settings (Page 150)
8.3
Program structure
G_code programs can always be freely programmed. The most important commands that are
included in the rule:
● Set a machining plane
● Call a tool (T and D)
Turning
Operating Manual, 05/2017, A5E40868721
Press the "Graphic view" softkey to toggle between the help screen and
the graphic view in the screen.
Parameter screen with a graphical view of a G code program block
Creating a G code program
8.3 Program structure
219