Domain-Id - HP FlexFabric 12500 Command Reference Manual
Routing switch series, mpls
Hide thumbs
Also See for FlexFabric 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (154 pages)
Table of Contents
Advertisement
Description : vpn1
Interfaces : GigabitEthernet3/0/2
Address-family IPv4:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Tunnel Policy : tunnel1
Maximum Routes Limit : 5000
Address-family IPv6:
Export VPN Targets :
2:2
Import VPN Targets :
3:3
Export Route Policy : outpolicy
Import Route Policy : inpolicy
Tunnel Policy : tunnel1
Maximum Routes Limit : 5000
domain-id
Use domain-id to configure an OSPF domain ID.
Use undo domain-id to restore the default.
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
Default
The OSPF domain ID is 0.
Views
OSPF view
Predefined user roles
network-admin
mdc-admin
Parameters
domain-id: Specifies an OSPF domain ID, in one of these formats:
Integer, in the range of 0 to 4294967295. For example, 1.
•
•
Dotted decimal notation. For example, 0.0.0.1.
Dotted decimal notation:16-bit user-defined number in the range of 0 to 65535. For example,
•
0.0.0.1:512.
secondary: Specifies a secondary domain ID. Without this keyword, the command specifies a primary
domain ID.
78
Advertisement
Table of Contents
