Static LSP commands
display mpls static-lsp
Use display mpls static-lsp to display static LSP information.
Syntax
display mpls static-lsp [ lsp-name lsp-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
lsp-name lsp-name: Specifies a static LSP by its name, a case-sensitive string of 1 to 15 characters. If you
do not specify a static LSP, the command displays information about all static LSPs.
Examples
# Display information about all static LSPs.
<Sysname> display mpls static-lsp
Total: 4
Name
egress123
ingress123
transit123
transit124
Table 10 Command output
Field
Total
Name
FEC
In/Out Label
State
FEC
-/-
202.118.224.132/32 NULL/1022
-/-
-/-
Description
Total number of static LSPs.
Name of the static LSP.
Forwarding equivalence class—IP prefix and the prefix length.
Incoming label/outgoing label.
Current state of the static LSP:
•
Up—The static LSP is available.
•
Down—The static LSP is not available.
•
Idle—The incoming label of the static LSP is not available.
•
Dup—The incoming label of the static LSP is used by a static CRLSP
or a static PW.
In/Out Label Nexthop/Out Interface
16/NULL
-
100.100.100.19
32/1022
100.100.100.17
34/1020
GE3/0/1
21
State
Up
Down
Down
Down