HP FlexFabric 12500 Command Reference Manual page 44
Routing switch series, mpls
Hide thumbs
Also See for FlexFabric 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (154 pages)
Table of Contents
Advertisement
Field
Label Adv Mode
Graceful Restart
Reconnect Time
Recovery Time
Loop Detection
Path Vector Limit
Discovery Sources
Targeted Hello
GigabitEthernet3/0/2
Hello Hold Time
Hello Interval
Label Acceptance Policy
Session Protection
State
Duration
Holdup time remaining
Description
Label advertisement mode negotiated. The device only supports the DU
mode.
Indicates whether GR is enabled on the peer.
•
On—Enabled.
•
Off—Disabled.
Reconnect time negotiated, in seconds.
Recovery time (in seconds) carried in packets sent by the peer.
Whether loop detection is enabled on the peer.
•
On—Enabled.
•
Off—Disabled.
Maximum Path Vector length configured on the peer.
Discovery source of the LDP peer.
LDP peer discovered by the extended discovery mechanism.
•
The address before -> (100.100.100.17 in this example) is the local LSR
ID.
•
The address after -> (100.100.100.20 in this example) is the LSR ID of
the peer.
•
(Active) indicates that the local LSR is the active end. It actively sends
Targeted Hellos to its peer.
•
(Passive) indicates that the local LSR is the passive end. It passively
responds to the Targeted Hellos from its peer.
•
(Active, Passive) indicates that the local LSR acts as both the active end
and the passive end.
Interface running LDP basic discovery. The device discovers the LDP peer
by sending Link Hellos out of the interface.
Hello hold time negotiated, in seconds.
Current Hello interval, in milliseconds.
Label acceptance policy used to filter label mappings received from the
peer.
Whether session protection is enabled.
•
On—Enabled.
•
Off—Disabled.
Session protection state:
•
Incomplete—Session protection is not ready.
•
Ready—Session protection is ready.
•
Protecting—The session is under protection.
Local session protection duration, in seconds.
Infinite indicates that session protection takes effect permanently.
Remaining time of the session hold timer, in seconds.
This field is displayed only when the session protection state is Protecting.
A value of Infinite indicates that session protection takes effect
permanently.
39
Advertisement
Table of Contents
