Sony DVS-9000 User Manual page 170

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Setting the transition rate in the numeric keypad control block

Executing a Transition

Enter the desired transition rate with the numeric keypad.

If required, press the [TC] button to toggle the input mode (frame input or

timecode input).

• Enter a value of up to three digits.

• To cancel the entry, press any of the six buttons in the leftmost column

([WIPE], [DME], ...) or the [TRANS RATE] button.

Press the [ENTR] button.

This confirms the entry, and the new setting appears in the transition

control block display.

TRANS RATE button

Region selection buttons

Numeric keypad control block

In the numeric keypad control block, press the [TRANS RATE] button.

Press the region selection button for the M/E or PGM/PST bank for which

you want to set the transition rate, turning it on.

The numeric keypad control block display now shows the selected region

name and the current transition rate setting for the region.

With the numeric keypad, enter the transition rate.

ENTER button

Numeric keypad